Chemical Tanker Washout

chemical bay

Chemical Tanker Washout Services in Lubbock, Texas

Our chemical tanker washouts for standard tankers and pneumatic tankers offer solutions tailored to your unique needs. We ensure precise and careful cleaning through meticulous attention to detail, specialized equipment, and highly trained washout technicians. Call us at (806) 993-1620 if you have questions about our ability to handle a specific chemical.

⚠ IMPORTANT: Lubbock Allstar is unable to wash chemical tankers with more than five (5) gallons of heel. Please ensure your tanker meets this requirement before arrival.

Our Chemical Washout Process

Every chemical washout starts with our technicians reviewing the Safety Data Sheet (SDS) for your prior load. They then inspect the tanker interior and identify any potential hazards or areas requiring special attention.

We use a boiler-and-vat system with a selection of spinner sizes matched to the specific requirements of the tanker and the product being washed out. The system delivers 100 GPM at 300 PSI using hot or cold water to flush product, followed by recirculation with the appropriate cleaning agent:

  • Caustic solutions for general chemical residue removal
  • Detergents for lighter cleaning requirements
  • PK21 specifically for polymer removal

During the rinse cycle, we can neutralize with hot or cold water, steam, or flush with soda ash to neutralize acids.

Regulatory Compliance and Safety Standards

The transportation of hazardous chemicals is subject to stringent regulations from the DOT, EPA, and OSHA. These regulations mandate thorough cleaning procedures to prevent cross-contamination, spills, and environmental pollution. Non-compliance can result in fines, license revocation, and civil liabilities. Our processes are designed to meet or exceed all applicable regulatory requirements.

Why Clean Chemical Tankers Matter

Chemical tankers are crucial components of the supply chain for oil and gas, agriculture, and manufacturing. Even trace amounts of residue from previous loads can compromise the integrity of subsequent shipments, leading to costly product recalls, regulatory penalties, and reputational damage. Consistent, regular washouts significantly decrease both the time and cost per washout while protecting product quality.

SDS Review & Inspection

Every chemical washout begins with technicians reviewing your prior-load SDS, then inspecting the tanker interior for hazards or areas requiring special attention.

Boiler-and-Vat System

Boiler-and-vat with selectable spinner sizes. Delivers 100 GPM at 300 PSI. Hot/cold water flush, then recirculation with caustic, detergent, or PK21 for polymer removal.

Safety Measures & PPE

Technicians trained in chemical handling and PPE (gloves, goggles, respirators). Spill containment systems, emergency showers, and eyewash stations on-site. Strict adherence to DOT, EPA, and OSHA regulations.

Pneumatic Tanker Washouts

We wash out both food grade and chemical pneumatic tankers — a service that sets us apart from most wash facilities. Our pneumatic cleaning systems use compressed air to dislodge and remove residues without manual scrubbing, reducing downtime and labor costs. We accommodate petrochemicals, acids, solvents, and agricultural products. Call to discuss your prior load and our capability for your specific pneumatic tanker.

Environmental Responsibility

We invest in eco-friendly technologies and sustainable practices. Our facility includes advanced environmental controls to prevent accidents and mitigate adverse effects, and we continuously look for ways to reduce our footprint while maintaining the cleaning effectiveness our customers depend on.

Why Choose Lubbock Allstar for Chemical Washouts

Pneumatic capability most facilities don’t offer. Boiler-and-vat at 100 GPM / 300 PSI. SDS-driven process for every load. PK21 for polymer; soda ash for acid neutralization. Full DOT, EPA, and OSHA compliance — backed by trained technicians, spill containment, and a strict no-heel-over-5-gal policy that keeps every wash safe and predictable.

Frequently Asked Questions

How long does a chemical tanker washout take?

It varies based on the tanker size, the chemical involved, and the level of contamination. Our team will provide you with an estimate when you call.

Do you wash crude oil tankers?

Yes, as long as there is no heel in the tank.

What safety measures do you have for hazardous chemicals?

Technicians undergo rigorous training in chemical handling and wear appropriate PPE. Our facility is equipped with spill containment, emergency showers, and eyewash stations. We strictly adhere to DOT, EPA, and OSHA regulations.

What cleaning agents do you use?

Industry-approved agents matched to the specific chemical, including caustic solutions, detergents, and PK21 for polymer removal. We can neutralize acids with soda ash during the rinse cycle.

Contact info

in**@**************sh.com
Fill out info on Contact Page
(806) 993-1620

4620 Ave A Lubbock, TX

Mon-Fri 7:00 AM - 6:00 PM
Sat 7:00 AM to 12:00 PM
Sunday - Closed

1612 N I-27 Lubbock, TX

Mon-Fri 7:00 AM to 6:00 PM
Sat 7:00 AM to 12:00 PM
Sunday - Closed

Scroll to Top